Drops, closets and testing, counted as you go
Cabling jobs are measured in drops, footage and closets, so techs log drops pulled, terminated and tested by room and you see each area's progress against the plan and the hours budget.
7 day free trialNo card to startAdmins and office staff free
Screens show example data.
- Built by a working integrator
- 7 day free trial, no card
- Admins and office staff free
- Data stored in the United States
Count drops where they were pulled
Techs split the day with the 27 10 00 Structured cabling codes: Rough-in and pathways, Cable pull, Terminate and test, and Racks and patching. Counted codes ask how many drops or racks, and Finished closes out the room.
- Paste Room 101-130 to add thirty rooms at once.
- Hours vs budget in green, amber or red for every room and closet.
- Network, paging and intercom codes for the rest of Division 27.
Know how many drops are left, and how long they will take
Rooms & budgets shows each room's planned and done counts, the pace in drops per hour and the hours still needed. The room finder can read the technology drawings and propose the counts.
- Planned counts from the drawings, checked by you before they are added.
- No room shows hours that were not split, so nothing hides.
- Download a CSV for the GC or your own tracking.
| Room | Done / planned | Hours vs budget | Status |
|---|---|---|---|
| Room 214 | 12 / 12 | 9.5 of 10 h | Finished |
| Room 215 | 8 / 12 | 7.0 of 10 h | In progress |
| Room 216 | 0 / 12 | 0.0 of 10 h | Not started |
| Library | 14 / 24 | 15.5 of 16 h | In progress |
| IDF 2 | 60 / 96 | 23.0 of 20 h | In progress |
Reports that count drops, not paragraphs
With Low voltage and data as your trade, the AI summary reports the way a PM reads a cabling job: drops pulled and terminated by area, racks built, testing and systems brought online.
- It flags what stalls cabling work, like ceilings closing before pulls are finished, missing sleeves or pathway, and failed test runs.
- Upload technology drawings or a drop count when you create the job and it fills in from them.
- Photos of the IDF and MDF go in with captions.
Rooms worked today: Room 214, Room 215, IDF 2.
- Room 214: Pulled, dressed and labeled 12 Cat6A drops to the teaching wall and projector location. Cable pull is finished in this room.
- Room 215: Pulled 8 of 12 drops. The grid stays open for the last 4 tomorrow.
- IDF 2: Terminated and tested 20 drops on patch panel B. All 20 passed.
| Cat6A plenum cable | 1,850 ft |
| Cat6A jacks | 40 |
| J-hooks, 2 in | 60 |
The materials your techs reach for
The material picker starts with your company's favorites and stock, then a low voltage list: cable (Cat6, Cat6A, coax, fiber) by the foot, terminations, support and pathway, devices and racks.
- Star favorites once and they show first for everyone.
- Most used fills in from what the crew logged in the last 90 days.
- Custom items a tech types in go to the office to add to stock or match.
Built for closets, ceilings and basements
Works without signal
Entries save on the phone in an IDF closet or a basement and sync when the tech gets bars again.
Punch list with photos
Punch items carry the room and a photo, and the crew closes them with an after photo.
Moves, adds and changes
Service tickets for move, add and change work, scheduled and logged like any other call.
Your overtime rules
Weekly and daily overtime, weekend rules, shift premiums and travel pay are settings.
Log for crew
Foremen log the day for a whole pull crew in one step.
Progress for the GC
A private link with room progress, reports and photos, and nothing about pay.
Questions people ask first
Can DayReport track drops and footage?
Yes. Techs log drops per room on the counted cabling codes, and materials by the foot. Rooms and budgets show drops done against planned, the pace and the hours still needed.
Does DayReport replace our certification tester software?
No. Test results stay in your tester's software. DayReport records that testing was done as part of the day's work, flags failed runs the tech reports, and keeps Test results on the closeout checklist.
Can we use DayReport for service and move, add, change work?
Yes. Service jobs hold numbered tickets, and techs attach their hours to the ticket they worked.
Do our techs need to install an app?
No. DayReport runs in the phone's browser and adds to the home screen like an app, so a new tech is working a couple of minutes after you invite them. Native iPhone and Android apps are coming soon.
How much does DayReport cost?
$19 per technician or foreman per month. Admins, office managers, project managers and accountants are free unless you give one a field seat to log their own time. 7 day free trial, no card to start.
Keep exploring
Try it on your next job
Set up your company, invite a technician and log a real day. Setup takes about ten minutes, and the first 7 days cost nothing.
No card to startAbout ten minutes to set upCancel any time